Parts of lathe machine

Lathe Machine Operation 1. Mounted on the traverse slide of the carriage, and uses a handwheel to feed tools into the workpiece. Another way of turning large parts is a sliding bed, which can slide away from the headstock and thus open up a gap in front of the headstock for large parts.

All other varieties are descended from these simple lathes.

Lathe Machine: Parts, Operations

To mount tool holders in which the cutting bits are clamped. The work is usually held in a collet, but high-precision 3 and 6-jaw chucks are also commonly employed.

It turns the cylindrical work piece, and during turning a sharp edge cutting tool introduce, which cuts the metal. One type of specialized lathe is duplicating or copying lathe also known as Blanchard lathe after its inventor Thomas Blanchard. Lead screw Lead screw is situated at the bottom side of bed which is used to move the carriage automatically during thread cutting.

It is usually attached to a metal face plate attached to the spindle. Thus, most work must be done axially, towards the headstock, or at right angles, but gently.

Parts of the Lathe Machine

An optional taper turning attachment would Parts of lathe machine mounted to it. A specific curved tool rest may be used to support tools while shaping the inside. It is placed at right hand side of the bed. If a steady is not available, the end face being worked on may be supported by a dead stationary half center.

This section needs additional citations for verification. For a list of makers and additional details of how they function see: Legs Legs are used to carry all the loads of the machine. This is usually a horizontal beam that holds the chips and the swarfs.

For the lathe machine to function and perform its operations, various important parts are integrated together. Bed It is the main body of the machine. Live center top ; dead center bottom A soft dead center is used in the headstock spindle as the work rotates with the centre.

Now all unwanted metal is removed by moving the carriage form horizontally and vertically as desire according to the job requirement. The main function of tail stock to support the job when required.Lathe machine is a basic machine which is used in every metal forming industries.

It is combination of many parts which works together to perform a desire function. A lathe machine is used to machine cylindrical work piece which is degree symmetrical form the axis of rotation.

Step 1: Find your machine by clicking on one of the categories below. Step 2: Click on your model. Step 3: Click the Purchase Parts button. If there is no Purchase Parts button next to the machine you selected, parts are not available online, but may still be available.

Parts of Lathe Machine: The lathe consist following parts. 1. Bed. It is the main body of the machine. All main components are bolted on it. It is usually made by cast iron due to its high compressive strength and high lubrication quality.

Call the local distributor and talk with sales and service about support and parts. Look up independent CNC lathe machine service techs to get their opinion on the reliability of the brand.

Search online for a similar year makes and models to see price points.

492 results

Get the hours of operation. About product and suppliers: offerslathe machine parts products. About 78% of these are machining, 3% are casting, and 1% are sheet metal fabrication.

Lathe machine: Main Parts, Operation and Working

• Steady Rest: Clamped to the lathe ways, it uses adjustable fingers to contact the workpiece and align it. Can be used in place of tailstock or in the middle to support long or unstable parts being machined.

152 results Download
Parts of lathe machine
Rated 0/5 based on 48 review